Sunday, July 15, 2018


15JUL2018

Location: Sterling Shipyard, Port Neches, TX;

Events: Literally nothing interesting to report.

Things learned about vessel/barge: Nothing new.

Classroom information application(s):  None applicable.

Supplemental Information: Viva la France for winning the World Cup today.

Rules of the Road Scenarios? None Observed.

Senior Crewmember Report


            For this year’s senior crewmember interview, I sat down with the Chief Engineer of the M/V Martin Explorer. Edward Crowder, born and raised in the Tampa, Florida area, has held the title of Chief Engineer for approximately 25 years of the 39 years he has been working in the maritime industry. Large, covered in tattoos, and sporting long hair and a mustache, Chief is the iconic image of classic rocker or biker. He would often talk about his love of motorcycles and his shop he has back at his house where he builds and repairs them, with a healthy dose of classic rock discussion thrown in for good measure. Chief Crowder was something of a wild child and rebel as a young man, dropping out of high school and going off on his own for a while, even getting his own apartment where he said he loved listening to his favorite Elvis Costello record. At the age of 16 his father came to him and told him he needed to sort his life out and offered young Edward a job working on his uncle’s boat. His father had lied to his uncle, saying Edwards was 17 going on 18, when in reality he was a full year younger. These were different times and it was a lot easier to pull a fast one like this back then, before TWIC cards and Homeland Security and all that expensive bull, according to Chief that is. For perspective, he mentioned that he started off making $20 a day compared to my $156 a day.


When I asked Chief Crowder about what he liked best about the maritime industry he got a bit jaded and joking replied “Nothing…wait, don’t put that. It used to be exciting, now it just pays the bills.” After so long working in the industry and with all the changes that it has gone through in that time, its no wonder how a sailor can get burnt out of the job. Naturally, when I asked him what he liked least, he said he did not like how much the industry has changed and the direction it has gone, that hawsepipers like himself were a dying breed and companies did not want them anymore. He said the companies wanted “educated fools” instead, guys like myself who had a college degree but didn’t know one end of a wrench from the other.

            Chief Crowder had mentioned earlier in the summer that he had taken some classes at San Jacinto Maritime. So I asked him if the opportunity came about where he were back at the campus one day and Captain Arrowwood came to him and asked him to speak to the student’s like myself for a moment, what advice would he offer? He thought a moment then said “Learn the boat; get in there and find shit out. Ask questions (he gave me a long look then), but not too many at once.” You see, I shared the same watch with the Chief and he was always nearby, so I had a habit of asking him all the questions I came up with any given day. About halfway through the hitch he told me I only got 3 questions a day, he was only joking a little.


As you would expect of anyone working nearly 40 years in any industry, Chief Crowder was a font of sea stories. It would take him a moment to get started if you asked, but once he got primed up, he would go on and on about the wild times he has had underway. He’s been an offshore tug guy most of that career and in that time he has traveled to ports in South America, Puerto Rico, Honduras, and the Florida Keys, just to mention a few that he rattled off. With a wistful smile, he said he and some guys used to go swimming by jumping off the upper decks of a boat he used to work on. The one that stood out the most, to him at least, was one time when they were underway on a 135 foot tug in the Gulf, pulling an empty tow behind them, and they got caught in a hurricane, the Storm of the Century he said it was called later. It seems two different storms clashed together in the Gulf and they were stuck out in 30 to 35 foot seas, the kind where swells had swells on top of them, and while sitting in the fiddly with his life vest on he could see the tow rise up one moment only to utterly disappear the next. You could tell that one rattled him.


Saturday, July 14, 2018


14JUL2018

Location: Sterling Shipyard, Port Neches, TX;

Events: Literally nothing interesting to report.

Things learned about vessel/barge: Nothing new.

Classroom information application(s):  None applicable.

Supplemental Information: Decided to work on wrapping up this project since I have all this free time, I should have it all complete by the end of this weekend aside from the daily log entries.

Rules of the Road Scenarios? None Observed.

Friday, July 13, 2018


13JUL2018

Location: Sterling Shipyard, Port Neches, TX;

Events: Literally nothing interesting to report.

Things learned about vessel/barge: Nothing new.

Classroom information application(s):  None applicable.

Supplemental Information: Today was less aggravating then yesterday, but still just as dull. Hooray payday?

Rules of the Road Scenarios? None Observed.

Thursday, July 12, 2018


12JUL2018

Location: Sterling Shipyard, Port Neches, TX;

Events: Literally nothing interesting to report, again.

Things learned about vessel/barge: Nothing new.

Classroom information application(s):  None applicable.

Supplemental Information: I did manage to get off the boat for about 5 minutes, they had moved our trash dumpster to the far end of the dry dock. I walked around the boat a bit to see the work that had been done. They’ve completed the sandblasting and painting of the hull, but the shafts aren’t back in, the rudders are still off, and there are several openings into the hull where guys were accessing various parts of the boat.

Rules of the Road Scenarios? None Observed.

Wednesday, July 11, 2018


11JUL2018

Location: Sterling Shipyard, Port Neches, TX;

Events: This “quick repair job” has been turned into the boat major shipyard trip since they can’t find replacement wheels. They yard is setting up to sandblast the hull either today or tomorrow. Word now is that the boat will be here up to a month now.

Things learned about vessel/barge: Nothing new.

Classroom information application(s):  None applicable.

Supplemental Information: The steersman has been assigned to another boat out in Sulfur, LA and leaves tomorrow, meaning it will be just me and the captain until further notice. What an exciting end to this summer internship…

Rules of the Road Scenarios? None Observed.

Tuesday, July 10, 2018


10JUL2018

Location: Sterling Shipyard, Port Neches, TX;

Events: Word has it that they can’t find replacement wheels as quickly as planned so we may be here as late as Friday. Nothing much really going on otherwise, just some small vessel upkeep.
Things learned about vessel/barge: Engine room familiarization.

Classroom information application(s):  None applicable.

Supplemental Information: Well, I have no idea how long I’ll be here but at least I have plenty of time to catch up on my reading I suppose.

Rules of the Road Scenarios? None Observed.

Monday, July 9, 2018


09JUL2018

Location: La Port, TX and Sterling Shipyard, Port Neches, Texas;

Events: Reported to the home office this morning and was informed I would not be going to the Herndon R. like I was initially informed, but instead I’m getting on the Dani Mayes whose headed to the shipyard in Port Arthur (Port Neches technically) for about a week. I arrived at the Sterling Shipyard around 0900, right as the boat was getting situated into the drydock. She’s here because she has a broken fluke. Around mid-evening time I assisted the steersman in servicing the starboard main engine.

Things learned about vessel/barge: Vessel Familiarization.

Classroom information application(s): Nothing applicable.

Supplemental Information: As seems typical for this company, everything is mutable, and plans get changed often and last minute. The captain and steersman on here are affable enough, and though I’m not entirely certain what I’ll be doing while we are laid up, it seems a nice enough boat to be on.

Rules of the Road Scenarios? None Observed.



Saturday, July 7, 2018


07UL2018

Location: Mosaic Riverview Terminal, Tampa, FL;

Events: Not much happened during the 1st watch other then pre-arrival checks and setting out the lines. I also completed my senior crew member interview with the Chief this morning and spent a little time with the captain going over route planning and preferred radar and AIS setups.

Things learned about vessel/barge: Nothing new.

Classroom information application(s): Leadership and Management.

Supplemental Information: I was informed at 0545 that I would be getting off the boat today instead of when we got to the shipyard next week, which put me in a small scramble to get my gear situated and final detailed taken care of. Looks like I’ll be transferring to another boat, the Herdron R., Monday morning for some indeterminate amount of time.

Rules of the Road Scenarios? Crossing and Passing in a Channel.



Friday, July 6, 2018


06JUN2018

Location: Gulf of Mexico, South of Pensacola, FL enr to Tampa, FL;

Events: Spent the 1st watch helping the tankerman set up to acid wash the barge then got tagged by the chief to help him remove a damaged rail arm and set up do some welding during the 2nd shift. The chief and I got together and welded some chain links to the handrail section we worked on earlier early in the 2nd shift, allowing us to run a chain from one end to the other in place of the removed broken piece.

Things learned about vessel/barge: Nothing New.

Classroom information application(s): None Applicable.

Supplemental Information: Today was just another day on the water, hot and sunny with the occasional offshore shower. I gotta say, I’ve been pretty lucky with the weather and sea-states I’ve encountered on this boat.

Rules of the Road Scenarios? None observed.



Thursday, July 5, 2018


05JUL2018

Location: Pensacola, MS;

Events: We didn’t hook up to the terminal and begin the loading of sulfur until well into the 1st watch, after that it was just monitoring the transfer. The 2nd watch continued where the 1st had left off, monitoring the transfer and generally staying out of the heat.

Things learned about vessel/barge: nothing new.

Classroom information application(s): Cargo Ops 1 loading and discharging of product.

Supplemental Information: Today has been one of the quietest days I’ve had on this boat, I should have my diagrams knocked out tonight, leaving only the Senior Crew Member Interview and the wheelhouse portion of the Equipment Report.

Rules of the Road Scenarios? None Observed.



Wednesday, July 4, 2018


04JUL2018

Location: Gulf of Mexico South of Mobile, AL, and anchored offshore of Pensacola, MS;

Events: I worked with the A/B Tankerman during the 1st watch chipping and grinding some hand rails on the aft of the barge, and eventually we set anchor outside Pascagoula. We had yet another drill today, this one for abandoning ship. The 2nd watch was uneventful aside from eventually pulling up anchor and heading in to the channel.

Things learned about vessel/barge: nothing new.

Classroom information application(s): Nothing Applicable.

Supplemental Information: It was a hot 4th of July, and while everyone back home was getting drenched from the shore side rain that came from the East, we were well south of it and it was a pretty day over all. The drill today was the 3rd in the last 4 days which I don’t understand why, but oh well. It did turn into a bitch fest which was annoying, but these things happen I suppose. I got a big chunk of the Equipment Report last night, just need a few things from the wheelhouse and captain. While I didn’t get to see any fireworks up close, several local towns were visible in the distance and another big storm coming in from offshore put on one hell of a light show.

Rules of the Road Scenarios? Anchor lighting and day shapes.



Tuesday, July 3, 2018


03JUL2018

Location: Gulf of Mexico, South of Pensacola, FL, enr to Pascagoula, MS;

Events: It was a quiet day underway, the 1st watch was spent sealing up the spots we hit with the wire wheel two days ago and trying to rewire the other two light fixtures in the heater room. Something didn’t get wired right though as none of the lights came on after rigging them up. We had another drill, this time reviewing what to do in the event of the boat getting pushed out of the notch of the barge. The 2nd watch was uneventful, we primed over the spots we had sealed earlier in the day and the lead tankerman went about a personal project of converting some amalgam of broken chairs and parts into some sort of functional rolling throne.

Things learned about vessel/barge: Electrical wiring.

Classroom information application(s): None applicable.

Supplemental Information: Turned out when wiring up the last two lights, the lead tankerman had hooked up to the wrong wire which didn’t carry a load. The assistant engineer and the backwatch figured it out and fixed it during their day shift. I’ve got about a week left on this boat which has put me on a heavy time crunch to finish my sea project, considering I thought I had 3 weeks to tidy it up. I should have it all knocked out in time, just gotta annotate the equipment list, draw out my diagrams and wrangle down one of the senior crew members for an interview (so basically everything lol).

Rules of the Road Scenarios? None Observed.



Monday, July 2, 2018


02JUL2018

Location: Mosaic Terminal, Tampa, FL;

Events: Spent the 1st watch transiting into Tampa Bay and ended it with connecting up to the terminal and beginning the discharge of molten sulfur, I got to run the crane this time which was awesome. The 2nd watch was quiet, just monitoring the transfer and working on this project.

Things learned about vessel/barge: Crane operations.

Classroom information application(s): Cargo Ops 1 loading and discharging of product

Supplemental Information: The inspection we were told about didn’t happen, none of us know why, which is fine really as having inspectors crawling around the boat always puts crew under more tension. I also confirmed with the office that in 2 weeks when the Oiler comes back on hitch, I will be transferring to another boat as there won’t be enough berthing on here to keep me. The boat is in Texas City which is close to home but won’t be my permanent boat as that has yet to be determined.

Rules of the Road Scenarios? Crossing and Passing in a Channel.




Sunday, July 1, 2018


01JUL2018

Location: Gulf of Mexico, South of Mobile, AL enr to Tampa, FL;

Events: During the 1st watch the lead tankerman and I worked on replacing 2 sets of old halogen lights with new LED ones, which required some consulting with the chief on how the remove the ballast and how to rewire them. During lunch we had our weekly drill, this one simulating a starboard engine fire on the boat. I spent most of the 2nd watch assisting the chief transferring fuel to the boat from the barge, getting experience on the other side of the transfer.

Things learned about vessel/barge: Fuel transfer ops for the boat.

Classroom information application(s): Cargo Ops 1 loading and discharging of product

Supplemental Information: Pretty easy day over all I’d say. Learned we are having an inspection when we get to Tampa, not exactly sure what for though, perhaps to define what exactly we need done in the shipyard and how long we will be there. Also found out the oiler, whose bunk I stay in, will be coming back during the shipyard period, which put me out of a room. Gonna talk to the office about what will happen, maybe they will just transfer me to another boat.

Rules of the Road Scenarios? None Observed



Saturday, June 30, 2018


30JUN2018

Location: Mosaic Faustina Terminal, St. James, LA and Mississippi Delta, enr to Tampa, FL;

Events: Spent the 1st watch shadowing the lead tankerman doing some small repair work on a few tools and eventually taking a wire wheel to some rust spots the previous crew busted up while I was off the boat. I spent the 2nd watch with the lead tankerman going over how to log my loads and discharges and the various different logs they keep in on the barge related to transfers.

Things learned about vessel/barge: How to fill out a Load/Discharge book, logs.

Classroom information application(s): Cargo Ops 1 loading and discharging of product

Supplemental Information: Using that wire wheel this mornings really felt like polishing someone else’s turds, the quality of work of the chipping was pretty sad. A lesson to hold is that in any industry, folks who are well settled into their jobs and with no ambition to advance or been seen excelling will only do the bare minimum of effort to pass the day. I don’t blame them, but it makes me somewhat irritated when I have to do extra work on same projects just to make sure that my work doesn’t look like garbage.

Rules of the Road Scenarios? Passing and Crossing in a Channel, River Traffic Stand-On and Give-Way vessels



Friday, June 29, 2018


29JUN2018

Location: Mosaic Faustina Terminal, St. James, LA;

Events: Flew into NOLA at 0930 this morning, met up with the rest of the oncoming crew and drove up to meet the boat at St. James. We arrived at the terminal just as the boat was tying off, so I went and deposited my gear in my room and headed back out to the barge to help with hooking up to the terminal even though I didn’t come on watch till 1800. The 2nd watch was spent reacclimating to the schedule and monitoring the transfer.

Things learned about vessel/barge: Nothing new.

Classroom information application(s): Cargo Ops 1 loading and discharging of product

Supplemental Information: Much as I’m not a fan of the schedule, I am glad to be back on the boat. It’s good the be back working (honestly, I was getting kinda broke) and getting seatime and training. I’m told we will be headed to dry dock soon for a while, it seems the inspection we had last month on delayed the trip by a month, not 6 months like I had believed. I should be able to get the last few loads and discharges I need to completely apply for my Tankerman ticket this trip, but I’m not sure how being at drydock will affect my seatime accrual.

Rules of the Road Scenarios? None Observed (unless you count getting through TSA)



Tuesday, June 12, 2018


12JUN2018

Location: Mosaic Faustina Terminal, St. James, LA;

Events: Got up early and helped the backwatch connect up to the terminal and begin the transfer. After that the A/B Tankerman and I put down some sealant on the chipped spots on the barge deck until it was time for me to head home.

Things learned about vessel/barge: Nothing new.

Classroom information application(s): Cargo Ops 1 loading and discharging of product

Supplemental Information: Bye Felicia! See ya’ll in 2 weeks!

Rules of the Road Scenarios? None Observed (unless you count I-10)

Monday, June 11, 2018


11JUN2018

Location: Mississippi River Delta en route St. James, LA;

Events: during the 1st watch I managed to finally finish chipping the forward wench and a few areas on the barge deck as we entered the delta. The 2nd watch was mostly spent cruising up the river and doing pre-arrival checks.

Things learned about vessel/barge: Nothing new.

Classroom information application(s): Nothing Specific.

Supplemental Information: Getting off the boat tomorrow is a big boost to morale for me and one of the A/B Tankermen, I’m driving a rental car back to Houston which is fine by me.

Rules of the Road Scenarios? Passing and Crossing in a Channel, River Traffic Stand-On and Give-Way vessels


Sunday, June 10, 2018


10JUN2018

Location: Gulf of Mexico south of Mobile, AL and en route St. James, LA;

Events: Spent 4 hours straight of the 1st watch needlegunning the forward wench, completing all of the inner area and about half of the final outside wall on the starboard side. I should be able to get the other half and the feet knocked out tomorrow morning. The 2nd watch was general vessel maintenance and rounds, generally a low-key shift.

Things learned about vessel/barge: Nothing new.

Classroom information application(s): Nothing Specific.

Supplemental Information: Man, this wench is consuming my time, considering about 90% of it was rusted out. I’ll have put almost 15 hours into it by the tie its done I estimate. We should be at the river tomorrow morning sometime around 10am, and St. James in the wee hours of Tuesday morning. I’m fantasizing about getting off there, but more likely I’ll have to ride back to Tampa and get off Friday.

Rules of the Road Scenarios? None Observed.

Saturday, June 9, 2018


09JUN2018

Location: Mosaic Terminal, Tampa, FL and departing for St. James, LA;

Events: Towards the end of the 1st watch the pump repairmen showed up and began the process of taking the old, broken pump shaft out and installing the new one. Everyone says they have never seen a shaft break in that way before, so the cause is still unknown. The 2nd watch was spent completing the discharge, disconnecting from the terminal, and getting flipped around by a harbor tug so we could head back out to sea. The lead tankerman again let me have a longer reign to complete the transfer operations.

Things learned about vessel/barge: Continued transfer operations.

Classroom information application(s): Cargo Ops 1 loading and discharging of product

Supplemental Information: The repairs went very smoothly which was a blessed relief considering the unusual nature of the break. Tomorrow is back the needlegunning that forward wench which I want to have finished before I get off this boat in the next few days.

Rules of the Road Scenarios? Crossing and Passing in a Channel.

Friday, June 8, 2018


08JUN2018

Location: Mosaic Terminal, Tampa, FL;

Events: About an hour before the 1st watch the barge’s port #2 pump shaft broke stopping all transfer operations. The cause is unknown, but the office is rebuilding one in the warehouse then driving it 18 hours from Houston to us here in Tampa. I spent some time tinkering on the needleguns and trying to find or build some better hose fittings but didn’t have much luck with either. The 2nd watch was just sitting on standby until the new equipment gets here.

Things learned about vessel/barge:  How to disassemble and reassemble a needlegun.

Classroom information application(s): Nothing Specific.

Supplemental Information: Well if it isn’t one thing on this barge, its another, I swear. It seems like every time we transfer or load, something goes wrong. I was concerned that the pump shaft breaking was my fault, as I took lead on the hook up and start-up procedures, but after talking with the lead tankerman and one of the mates my concerns were assuaged that I was not to blame. Hopefully we will know more when the parts arrive, whenever that will be, but either way we are stuck here for a fair while longer.

Rules of the Road Scenarios? None Observed.